Bending roll machine 8344
General information
Suitable for small to medium production as well as complex shapes, the 8344 CNC can bend profiles with variable radii and sections. The design with three lower bending rolls, mounted in a cassette, which is swivelling and adjustable in height, enables bending of very complex profiles in one single operation. The three rolls of the cassette are used as prebending roll, bottom roll and final bending roll. The cassette system also allows exchange of the rolls to other dimensions (applies to 70, 80 and 90 mm). The special design of the machine and the location of the four rolls eliminate all intermediate handling of the sheet between the prebending and the final bending. This simplified working method also means that the storage space around the machine can be reduced, a higher repetition accuracy is achieved as well as a higher productivity.
The adjustment of the cassette into the programmed position is carried out by means of ball screws. When bending is finished the lock clamp on the right hand side opens for the removal of the profile, if the profile is not closed, this function can be eliminated in the control program.
As standard the machine is delivered with hardened and ground rolls, motor 400V 3-phase and 24V control voltage.
- CNC-control with the capacity to store 200 programs in internal memory and nearly unlimited by attaching an external USB flash drive
- Pre-bending and final bending in one cycle
- All four rolls are driven
- Crowned rolls
- Programmable axis
- Designed for highest accuracy
- Rolls mounted in changeable cassette system
- Openable locking arm
- Adjustable crowning of the lower roll
- Program backup through external computer or attached USB flash drive
Simple to use control panel
The programming of the machine is facilitated by different menus available on the screen. In order to further simplify the programming, the control buttons are of multi-function type, whose functions are automatically changed when changing menus. The CNC has a internal storage capacity of 200 programs or near unlimited with an external USB flash drive.
The program consists of sections, where each section is provided with a bending value. This enables easy and quick programming of the machine for different bending operations. The CNC system can operate with interpolation, where the rolls are adjusted simultaneously with the feeding operation.
Technical data
| Art.no. | 8344 | -401010 | -401208 | -401507 | -401706 | -402005 |
|---|---|---|---|---|---|---|
| Capacity | 10/10 | 12/08 | 15/07 | 17/06 | 20/05 | |
| Working length (w) | mm | 1008 | 1258 | 1508 | 1750 | 2008 |
| Max sheet thickness Alu (250N/mm²) (t) | mm | 1,0 | 0,8 | 0,7 | 0,6 | 0,5 |
| Diameter of rolls (ø) | mm | 40 | 40 | 40 | 40 | 40 |
| Net weight | kg | 650 | 700 | 750 | 800 | 850 |
| Art.no. | 8344 | -550715 | -600720 | -601010 | -701020 | -801025 | -901030 | -601208 | -701215 | -801220 |
|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | 7/15 | 7/20 | 10/10 | 10/20 | 10/25 | 10/30 | 12/08 | 12/15 | 12/20 | |
| Working length (w) | mm | 740 | 740 | 1020 | 1040 | 1040 | 1040 | 1250 | 1290 | 1290 |
| Max sheet thickness (400N/mm²) (t) | mm | 1,5 | 2,0 | 1,0 | 2,0 | 2,5 | 3,0 | 0,8 | 1,5 | 2,0 |
| Diameter of rolls (ø) | mm | 55 | 60 | 60 | 70 | 80 | 90 | 60 | 70 | 80 |
| Net weight | kg | 650 | 650 | 650 | 650 | 700 | 750 | 700 | 700 | 750 |
| Art.no. | 8344 | -901225 | -701510 | -801515 | -901520 | -701707 | -801712 | -901716 | -802010 | -902015 |
|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | 12/25 | 15/10 | 15/15 | 15/20 | 17/07 | 17/12 | 17/16 | 20/10 | 20/15 | |
| Working length (w) | mm | 1290 | 1540 | 1540 | 1540 | 1790 | 1790 | 1790 | 2040 | 2040 |
| Max sheet thickness (400N/mm²) (t) | mm | 2,5 | 1,0 | 1,5 | 2,0 | 0,7 | 1,2 | 1,6 | 1,0 | 1,5 |
| Diameter of rolls (ø) | mm | 90 | 70 | 80 | 90 | 70 | 80 | 90 | 80 | 90 |
| Net weight | kg | 800 | 750 | 800 | 850 | 800 | 825 | 875 | 850 | 900 |
The prebending value is ca 70% of the indicated material.
Optional equipment
- Adjustable crowning support
- Chromium-plated rolls
- Adiprene-coated rolls or rolls with grooves
- Stacking tables
- Programmable support arm
- Additional safety equipment
- Infeed and outfeed equipment
Support
For support documents, see the product support page.